Товары и услуги
Glass-Filled Polyamide Examid® PA6 GF30 — Base Grade for Series Injection Molding
Description
Examid® PA6 GF30 is a versatile, high-performance polyamide 6 reinforced with 30 % E-glass fibre, specifically developed for service under elevated mechanical and thermal loads. The material combines high stiffness, impact toughness and property stability under vibration and temperature fluctuations.
High flowability and a heat-stabilized formulation ensure reliable mold filling and accurate part geometry, including thin-walled and complex designs. Thanks to frost resistance down to –30 °C and high flexural and tensile strength, Examid® PA6 GF30 is used effectively in technically demanding industrial components.
The material outperforms standard glass-filled polyamide 6 grades in dimensional stability, creep resistance and retention of mechanical properties in harsh climatic conditions.
Key advantages
- High stiffness and elastic modulus — increased load-bearing capacity
- Heat stabilization — resistance to thermo-oxidative aging
- Increased impact toughness — protection against failure under impact and temperature swings
- Hydrolytic resistance — suitable for humid environments and outdoor use
- Frost resistance down to –30 °C — property retention at low temperatures
- High flowability — uniform mold filling and shorter molding cycles
- Shrinkage accuracy — low shrinkage and high geometric stability
- High electrical insulation performance — for reliable electrical components
Typical applications
- Structural elements in the automotive industry: supports, housings, guides
- Premium-segment chair bases, furniture hardware components
- Engine compartment parts operating under vibration and thermal loads
- Housings of electromechanical devices that hold their shape when heated
- Fastening and mounting components with increased strength
The stated values are measured using in-house methods close to the corresponding ISO and GOST standards. The information is for reference only and is not an official batch data sheet. Please request the TDS and MSDS for the specific batch before industrial use.
