Polyamide PA6 Reinforced with 30 % Carbon Fiber — Examid® PA6 CF30

Description

Examid® PA6 CF30 is a high-performance polyamide 6 reinforced with 30 % carbon fiber and heat-stabilized for service at elevated temperatures. The material combines high stiffness (17,000 MPa) with excellent impact strength (70 kJ/m²), remaining strong and reliable even under dynamic loads.

Thanks to its excellent melt flow, Examid® PA6 CF30 is well suited for manufacturing thin-walled, high-precision technical parts where heat dissipation, strength and dimensional stability are critical at the same time.

Low shrinkage (down to 0.2–0.4 % in the flow direction) ensures high geometric accuracy, while excellent processability makes the material a reliable choice for series production of complex components.

Key advantages

• High stiffness and heat resistance: up to 17,000 MPa and over 200 MPa tensile strength
• Impact strength of 70 kJ/m²: resistant to brittle failure under dynamic loads
• Heat stabilization: extended service life under sustained heat exposure
• Excellent melt flow (MVR 30): suitable for complex geometries and long runners
• Low shrinkage: geometric stability in series injection molding

Applications

• High-precision metal-replacement assemblies: lightweight, strong and conductive components
• Industrial automation and mechatronics: technical parts under constant load
• Automotive components: parts under thermal and vibration loads requiring stability
• Precision-critical products: guides, brackets, flanges, technical housings

The stated values are measured using in-house methods close to the corresponding ISO and GOST standards. This information is provided for reference only and does not constitute an official batch data sheet. Please request the TDS and MSDS for the specific batch before industrial use.