Товары и услуги
Extrusion polyamide Promyde B33 P2 G25 BL01
Description
Promyde® B33 P2 G25 BL01 is an extrusion-grade glass-filled polyamide with improved characteristics. The material offers high dimensional stability, creep resistance, high mechanical strength and thermal stability.
Advantages
- High dimensional stability
- Creep resistance
- High mechanical strength
- Hardness and rigidity
- Thermal stability
Applications
Suitable for the production of parts requiring high electrical insulation and thermal stability. Used for housings and supports that ensure structural reliability and stability. Manufacture of various industrial components requiring high strength and rigidity.
The listed values are measured by internal methods close to the corresponding ISO and GOST standards. This information is for reference only and does not constitute an official batch data sheet. Please request the TDS and MSDS for the specific batch before industrial use.
parameter
unit
value
Physical properties:
Density
g/cm³
1.32 (ISO 1183-1)
Water absorption (saturation, 23 °C)
%
6.8 (ISO 62)
Moisture absorption (air 23 °C, 50 % RH)
%
2.2 (ISO 62)
Melt volume rate (MVR, 275 °C / 5.0 kg)
cm³/10 min
30 (ISO 1133-1)
Viscosity number (96 % H₂SO₄)
mL/g
190 (ISO 307)
Mechanical properties:
Tensile modulus
MPa
8200 (ISO 527-1/-2)
Tensile strength
MPa
160 (ISO 527-1/-2)
Elongation at break
%
3.5 (ISO 527-1/-2)
Flexural modulus
MPa
7400 (ISO 178)
Flexural strength
MPa
230 (ISO 178)
Charpy impact strength (unnotched, 23 °C)
kJ/m²
75 (ISO 179-1/1eU)
Charpy impact strength (notched, 23 °C)
kJ/m²
7.5 (ISO 179-1/1eA)
Thermal properties:
Melting temperature (Tm)
°C
222 (ISO 11357-3)
Electrical properties:
Dissipation factor (23 °C, 1 MHz)
—
0.024 (IEC 62631-2-1)
Dielectric constant (23 °C, 1 MHz)
—
4 (IEC 62631-2-1)
Volume resistivity
Ω·m
10^13 (IEC 62631-3-1)
UL 94 flammability rating (3.0 mm)
—
HB* (IEC 60695-11-10)
HDT/A (1,8 MPa)
°C
195* (ISO 75-2)
MFR
g/10 min
15* (ISO 1133-1)
Mold shrinkage, longitudinal
%
1,2* (ISO 294-4)
Mold shrinkage, transverse
%
1,5* (ISO 294-4)
Glass fiber content
%
25 (ISO 3451-1)
*
Typical data for this polymer class, for reference.
Указанные показатели измеряются по внутренним методикам, близким к соответствующим ISO, ГОСТ
Информация носит ознакомительный характер, рекомендуем использовать техническую информацию после согласования с поставщиком и подписания нормативно-технической спецификации
