Товары и услуги
General-purpose injection molding polyamide 6 Volgamid 27
Description
A caprolactam polymerization product. Distinguished by high mechanical properties and a low coefficient of friction.
Key characteristics of injection molding Polyamide 6 include:
- High mechanical properties
- Low coefficient of friction
- Versatile applications
- Stability and durability
Applications
Widely used in mechanical engineering and in the automotive and medical industries, for the production of technical yarns and textile fibers, food packaging films, as well as technical products: fabrics, fishing nets, filters, ropes and cords, and tire cord fabrics used in tire manufacturing.
Material Wizard offers substitutes for this grade produced in Ukraine and the EU.
Parameter
Unit
Value
Other properties:
Relative viscosity
—
2,70 – 2,80
Mass fraction of extractable (water-soluble) substances
%
≤ 0,6
Density
g/cm³
1,13 (ISO 1183-1)
Mold shrinkage
%
1,5-2,0 (ISO 294-4)
Moisture absorption (24 h, 23 °C)
%
1,6-1,8 (ISO 62)
Melt flow rate (MFR)
g/10 min
20 (ISO 1133-1)
Melting temperature
°C
≥ 215 (ISO 11357-3)
Physical and mechanical properties:
Flexural modulus
MPa
2000 (ISO 178)
Elongation at break
%
70 (ISO 527-1/-2)
Tensile stress at yield
MPa
66
Tensile strength
MPa
72 (ISO 527-1/-2)
Flexural stress at maximum load
MPa
76 (ISO 178)
Charpy impact strength (unnotched, 23 °C)
kJ/m²
100 (ISO 179-1/1eU)
Charpy impact strength (notched, 23 °C)
kJ/m²
8 (ISO 179-1/1eA)
Thermal properties:
Heat deflection temperature (HDT/A, 1.8 MPa)
°C
50-55 (ISO 75-2)
Heat deflection temperature (HDT/B, 0.45 MPa)
°C
130-150 (ISO 75-2)
Electrical properties:
Dielectric constant, 10^6 Hz
—
3,4-3,5 (IEC 62631-2-1)
Dielectric dissipation factor, 10^6 Hz
—
0,02-0,03 (IEC 62631-2-1)
Dielectric strength
kV/mm
20,5 (IEC 60243-1)
Tensile modulus
MPa
2 800* (ISO 527-1/-2)
*
Typical data for this polymer class, for reference.
Указанные показатели измеряются по внутренним методикам, близким к соответствующим ISO, ГОСТ
Информация носит ознакомительный характер, рекомендуем использовать техническую информацию после согласования с поставщиком и подписания нормативно-технической спецификации
