Home Long-chain polyamides (PA610, PA612, PA12, PA11) Low-Moisture-Absorption Injection Molding Polyamide PA610 (PA610-L)

Товары и услуги

Low-Moisture-Absorption Injection Molding Polyamide PA610 (PA610-L)

Description

A semi-transparent crystalline material, partly derived from bio-renewable resources. It has low density, low water absorption, good impact resistance and high heat resistance. Technically, PA610 sits between the high-performance polyamide PA612 and the standard PA6 / PA66 polymers. It is widely used for monofilament production, industrial parts with high heat resistance, pipe extrusion and injection molding of high-duty parts.

Key properties

durability
very low moisture absorption
radiation resistance
weather resistance
fungus resistance
service temperature from -100 °C to 150 °C
ductility
fatigue strength

Applications

The material is used across all industries, including aerospace and defence applications. Its low moisture absorption ensures stable properties under any environmental conditions. The material costs considerably more than polyamide 6 and 66, but where uncompromising part reliability is required, choosing polyamide 610 is fully justified.

Low-Moisture-Absorption Injection Molding Polyamide PA610 (PA610-L)

Property

Unit

Value

Physical properties:

Вид

pellets

Pellet size

2 to 6

Density

g/cm³

1,1 (ISO 1183-1)

Glass fiber content

Moisture absorption

1,5 (ISO 62)

Rheological properties:

Melt flow rate (MFR), 250 °C, 2.16 kg

g/10 min

8 (ISO 1133-1)

Melt flow rate (MFR), 270 °C, 2.16 kg

g/10 min

12 (ISO 1133-1)

Mold shrinkage, longitudinal

0,8 (ISO 294-4)

Mold shrinkage, transverse

0,85 (ISO 294-4)

Mechanical properties:

Tensile strength, conditioned specimen

MPa

50 (ISO 527-1/-2)

Tensile strength, dry specimen

MPa

50 (ISO 527-1/-2)

Tensile strength, accelerated aging 10 years

MPa

45 (ISO 527-1/-2)

Charpy unnotched impact strength at +23 °C

kJ/m²

No break (ISO 179-1/1eA)

Charpy unnotched impact strength at -40 °C

kJ/m²

No break (ISO 179-1/1eA)

Unnotched impact strength at maximum moisture absorption, +23 °C

kJ/m²

No break

Impact strength, accelerated aging 10 years, at +23 °C

kJ/m²

No break

Charpy notched impact strength at +23 °C

kJ/m²

7 (ISO 179-1/1eA)

Charpy notched impact strength at -40 °C

kJ/m²

6 (ISO 179-1/1eA)

Shore hardness, D

Tensile elongation

50 (ISO 527-1/-2)

Compressive modulus, conditioned specimen

GPa

1,1

Compressive modulus, dry specimen

GPa

1,2

Thermal properties:

Melting temperature

°C

178 (ISO 11357-3)

Heat deflection temperature, 1.8 MPa

°C

50 (ISO 75-2)

Heat deflection temperature, 0.45 MPa

°C

125 (ISO 75-2)

Coefficient of linear thermal expansion, longitudinal

10^-4/K

1,2 (ISO 11359-2)

Coefficient of linear thermal expansion, transverse

10^-4/K

1,4 (ISO 11359-2)

Maximum recommended long-term service temperature

°C

110

Maximum recommended short-term exposure temperature

°C

150

Flammability

class

HB (UL 94) (UL 94) (UL 94) (UL 94)

Electrical properties:

Dielectric strength

kV/mm

32 (IEC 60243-1)

Volume resistivity

Ω·m

10^11 (IEC 62631-3-1)

Typical data for this polymer class, for reference.

Указанные показатели измеряются по внутренним методикам, близким к соответствующим ISO, ГОСТ Информация носит ознакомительный характер, рекомендуем использовать техническую информацию после согласования с поставщиком и подписания нормативно-технической спецификации