Товары и услуги
General-Purpose Injection Molding Polyamide 6 Grodnamid PA6-L-211/311
Description
This polyamide composition is produced on a PA6 basis and offers pronounced anti-friction, dielectric, impact-resistant, water-resistant, frost-resistant and strength characteristics.
Advantages
- Improved flowability
- Low coefficient of friction
- High strength values
- Good colorability
- High wear resistance
Applications
Used in the automotive, medical, aircraft, instrument-making, oil-production and railway industries.
Material Wizard offers substitutes for this grade produced in Ukraine and the EU.
The stated values are measured using internal methods close to the corresponding ISO and GOST standards. This information is for reference only and does not constitute an official batch technical data sheet. Please request the TDS and MSDS for the specific batch before industrial use.
parameter name
unit
value
Mechanical properties:
Tensile modulus
MPa
2500 (ISO 527-1/-2)
Tensile strength
MPa
70 (ISO 527-1/-2)
Elongation at break
%
>50 (ISO 527-1/-2)
Flexural modulus, +23 °C
MPa
2300 (ISO 178)
Charpy impact strength, unnotched, +23 °C
kJ/m²
NB (ISO 179-1/1eU)
Charpy impact strength, unnotched, -30 °C
kJ/m²
75 (ISO 179-1/1eU)
Charpy impact strength, notched, +23 °C
kJ/m²
8 (ISO 179-1/1eA)
Charpy impact strength, notched, -30 °C
kJ/m²
5 (ISO 179-1/1eA)
Thermal properties:
Melting temperature (10 °C/min)
°C
217 (ISO 11357-3)
Heat deflection temperature (HDT/A, 1.8 MPa)
°C
50 (ISO 75-2)
Heat deflection temperature (HDT/B, 0.45 MPa)
°C
135 (ISO 75-2)
Electrical properties:
Volume resistivity
Ω·m
1E13 (IEC 62631-3-1)
Surface resistivity
Ω
1E13 (IEC 62631-3-2)
Other properties:
Water absorption
%
2,2 (ISO 62)
Moisture absorption
%
2,5
Density
g/cm³
1,13 (ISO 1183-1)
Melt flow rate MFR (235 °C, 2.16 kg)
g/10 min
48 (ISO 1133-1)
Mold shrinkage, longitudinal
%
1.6 (ISO 294-4)
CTE, longitudinal
µm/(m·K)
80* (ISO 11359-1/-2)
UL 94 (1.6 mm)
class
HB* (UL 94)
Limiting oxygen index (LOI)
%
26* (ISO 4589-2)
*
Typical data for this polymer class, for reference.
Указанные показатели измеряются по внутренним методикам, близким к соответствующим ISO, ГОСТ
Информация носит ознакомительный характер, рекомендуем использовать техническую информацию после согласования с поставщиком и подписания нормативно-технической спецификации
