Товары и услуги
High-temperature reinforced polyamide Examid® PPA GF30 5VA
Description
Examid® PPA GF30 5VA is a reinforced polyphthalamide (PPA) specifically developed for service under elevated thermal, mechanical and regulatory requirements. The base polymer is a PA6T/66 copolymer reinforced with 30 % glass fiber and formulated with halogen-free flame retardants, which provides stable physical and mechanical properties over a wide temperature range and a high level of flame resistance.
The material is classified UL 94 V-0 (IEC 60695-11-10) at 0.8 and 3.0 mm thickness and also meets the 5VA rating, indicating its ability to withstand a vertical flame without dripping. The heat deflection temperature under load (HDT/A) reaches 282 °C, which allows the material to be used near heat sources for extended periods.
Advantages
- UL 94 V-0 flammability rating (IEC 60695-11-10) at 0.8 / 3.0 mm, supports the 5VA rating
- High heat resistance — up to 282 °C (HDT, 1.8 MPa)
- Reliable impact strength at low temperatures (down to –30 °C)
- Stable dielectric characteristics and electrical insulation
- Resistance to microcracking and thermal deformation
- Low organic emissions (VOC) and moderate odor (per VDA scale)
Applications
- Housings and components of automotive electronics where high flame resistance (V-0 / 5VA) and thermal stability are critical
- Power and control electrical equipment — relays, connectors, switching units, junction boxes
- Thin-walled technical parts that must retain their geometry and stiffness at high temperature and humidity
- Assemblies near heat sources — in converters, inverters, ventilation systems and ICE control systems
- Electrical insulation components and coil bobbins requiring resistance to breakdown voltage and stable dielectric losses
- Household appliances and lighting equipment requiring VDA compliance, flame resistance and low VOC
The values indicated are measured using internal methods close to the corresponding ISO and GOST standards. This information is provided for reference only and does not constitute an official technical data sheet for a batch. Please request the TDS and MSDS for the specific batch before industrial use.
