Home 30% Glass Fiber PA66, Black — Examid® PA66 GF30 BKT

Товары и услуги

30% Glass Fiber PA66, Black — Examid® PA66 GF30 BKT

Description

Examid® PA66 GF30 BKT is a black polyamide 66 reinforced with 30% glass fiber, ready-to-mold without coloring. A workhorse for housings and structural parts: tensile strength of 150 MPa (conditioned), flexural modulus of 8000 MPa, HDT of 255 °C at 0.45 MPa.

Unlike the natural PA66 GF30 Y, this grade comes in factory black with batch-to-batch shade consistency — eliminating masterbatch dosing and color-variation risk. MFR of 30 g/10 min (275 °C, 5 kg) is standard class flow.

The PA66 matrix retains stiffness at 120–150 °C where glass-filled PA6 gives up. Direct analog — Ultramid® A3WG6 BK: comparable mechanics with better volume-procurement economics. Processing: melt 280–295 °C, mold 100–140 °C, up to 20–25% regrind.

Black ready-to-mold PA66 GF30: consistent color without masterbatch

Applications: housings and covers, structural elements for elevated-temperature service, visible parts requiring consistent black color, E&E components.

Typical properties:

parameter

unit

value

General properties:

Density

g/cm³

1.38 (ISO 1183-1)

Glass fiber content

30 (ISO 3451-1)

Melt mass-flow rate MFR (275 °C, 5 kg)

g/10 min

30 (ISO 1133)

Molding shrinkage

0.3–0.6 (ISO 294-4)

Mechanical properties:

Tensile strength (cond.)

MPa

150 (ISO 527-2)

Strain at break

3.5 (ISO 527-2)

Flexural strength (cond.)

MPa

220 (ISO 178)

Flexural modulus (cond.)

MPa

8000 (ISO 178)

Izod notched impact (23 °C, 50% RH)

kJ/m²

10 (ISO 180/1A)

Thermal properties:

Melting point, DSC

°C

260 (ISO 11357-1/-3)

HDT (0.45 MPa)

°C

255 (ISO 75-1/-2)

Burning behavior (1.6 mm)

—

HB (UL 94)

Glow wire flammability index GWFI (1.6 mm)

°C

650 (IEC 60695-2-12)

Electrical properties:

Volume resistivity

Ω·m

10¹³ (IEC 62631-3-1)

Surface resistivity

10¹⁰ (IEC 62631-3-2)

Processing recommendations:

Melt temperature

°C

280–295

Mold temperature

°C

100–140

Molding pressure

MPa

100–140

Injection speed

—

medium

Regrind

up to 20–25

Указанные показатели измеряются по внутренним методикам, близким к соответствующим ISO, ГОСТ Информация носит ознакомительный характер, рекомендуем использовать техническую информацию после согласования с поставщиком и подписания нормативно-технической спецификации