Товары и услуги
Glass-filled flame-retardant polyamide Examid PA6 GF25-FR 7035
Description
Self-extinguishing polyamide reinforced with 25 % glass fiber. Offers improved mechanical and electrical properties, flame resistant (UL 94 V-0 at 3.2 mm), self-extinguishing. Resistant to non-polar solvents, kerosene, petrol, benzene, mineral oils, alkalis and acids.
Advantages
- Self-extinguishing material
- High strength and rigidity
- Chemical resistance
- Heat resistance
Applications
Mechanical engineering, electrical engineering, electronics, aviation, lighting fixtures, fire protection equipment, household appliances, transport, instrument making and other industries.
The listed values are measured by internal methods close to the corresponding ISO and GOST standards. This information is for reference only and is not an official batch data sheet. Please request the TDS and MSDS for a specific batch before industrial use.
Parameter
Unit
Value
Physical and mechanical properties:
Density
g/cm³
1.59 (ISO 1183-1)
Tensile strength
MPa
125 (ISO 527-1/-2)
Flexural strength
MPa
180 (ISO 178)
Flexural modulus
MPa
8000 (ISO 178)
Charpy impact strength (unnotched, 23 °C)
kJ/m²
36 (ISO 179-1/1eU)
Thermal properties:
Melting temperature (Tm)
°C
218 (ISO 11357-3)
Heat deflection temperature (HDT/A, 1.8 MPa)
°C
192 (ISO 75-2)
Vicat softening temperature (B/50N)
°C
210 (ISO 306)
Processing properties:
Melt flow rate (MFR, 250 °C / 2.16 kg)
g/10 min
8 (ISO 1133-1)
Mold shrinkage (flow direction)
%
0.1…0.3 (ISO 294-4)
Mold shrinkage (transverse direction)
%
0.5…0.7 (ISO 294-4)
Melt temperature
°C
240
Mold temperature
°C
80
Electrical properties:
Dielectric strength
kV/mm
23 (IEC 60243-1)
Volume resistivity
Ω·m
1×10¹³ (IEC 62631-3-1)
UL 94 flammability rating at nominal thickness
class
V-0 (UL 94)
Glow-wire flammability index (GWFI)
°C
960 (IEC 60695-2-12)
Comparative tracking index (CTI)
V
350 (IEC 60112)
*
Typical data for this polymer class, for reference.
Указанные показатели измеряются по внутренним методикам, близким к соответствующим ISO, ГОСТ
Информация носит ознакомительный характер, рекомендуем использовать техническую информацию после согласования с поставщиком и подписания нормативно-технической спецификации
