Home Glass-filled polyamides Glass-Fiber-Reinforced Polyamide Examid PA6 GF10-I

Products and services

Glass-Fiber-Reinforced Polyamide Examid PA6 GF10-I

Description

Examid PA6 GF10-I is an injection-molding polyamide 6 containing 10% glass fiber, impact-modified and heat-stabilized. The material is intended for use in various industrial fields requiring a combination of high mechanical strength, heat resistance and impact resistance. Examid PA6 GF10-I is a reliable material for producing parts of complex geometry with high service performance at a comparatively low cost.

Advantages

High mechanical strength
Excellent impact resistance
High dimensional stability
Heat resistance
Reduced moisture absorption

Applications

Used in a wide range of industrial applications, such as:

Automotive industry: body parts, interior parts, chassis elements, engine and cooling system components.

Electrical engineering and electronics: housing parts, insulators, components requiring high electrical and mechanical properties.

Mechanical engineering: machine and mechanism parts subjected to significant mechanical and thermal loads.

Consumer goods: household appliance elements and tools where strength and impact resistance are important.

Glass-Fiber-Reinforced Polyamide Examid PA6 GF10-I

parameter name

unit

value

Rheological properties:

Melt volume-flow rate, MVR

cm³/10 min

40 (ISO 1133-1)

Mold shrinkage, parallel

0,6 (ISO 294-4)

Mold shrinkage, normal

0,8 (ISO 294-4)

Mechanical properties:

Tensile modulus

MPa

4000 (ISO 527-1/-2)

Tensile strength

MPa

100 (ISO 527-1/-2)

Elongation at break

4 (ISO 527-1/-2)

Flexural modulus

MPa

4100 (ISO 178)

Charpy impact strength, +23 °C

kJ/m²

60 (ISO 179-1/1eA)

Charpy impact strength, −30 °C

kJ/m²

50 (ISO 179-1/1eA)

Charpy impact strength (notched, +23 °C)

kJ/m²

10 (ISO 179-1/1eA)

Charpy impact strength (notched, −30 °C)

kJ/m²

8 (ISO 179-1/1eA)

Thermal properties:

Melting temperature, 10 °C/min

°C

222 (ISO 11357-3)

Heat deflection temperature, 1.80 MPa

°C

180 (ISO 75-2)

Heat deflection temperature, 0.45 MPa

°C

200 (ISO 75-2)

Coefficient of linear thermal expansion, parallel

E-6/K

Coefficient of linear thermal expansion, normal

E-6/K

Electrical properties:

Relative permittivity, 1 MHz

3,8 (IEC 62631-2-1)

Dielectric loss tangent, 1 MHz

E-4

250 (IEC 62631-2-1)

Volume resistivity

Ω·m

1E13 (IEC 62631-3-1)

Surface resistivity

Ohm

1E10 (IEC 62631-3-2)

Comparative tracking index

500 (IEC 60112)

Other properties:

Water absorption

8 (ISO 62)

Moisture absorption

2,5

Density

g/cm³

1190 (ISO 1183-1)

Viscosity number

cm³/g

145

Typical data for this polymer class, for reference.

The stated values are measured by internal test methods close to the corresponding ISO and GOST standards. The information is for reference only; we recommend using the technical data after agreement with the supplier and signing of a normative technical specification.