Home Styrenic TPE-S Thermoplastic elastomer Exaflex TPE-S 60A

Products and services

Thermoplastic elastomer Exaflex TPE-S 60A

Description

Exaflex TPE-S 60A is a filled compound based on styrene-ethylene-butadiene-styrene rubber (SEBS). The material offers a set of key characteristics such as good weather resistance, UV resistance, excellent adhesion to polypropylene, low density and a wide operating temperature range from -50 to +125 °C.

Advantages

Weather resistance
UV resistance
Excellent adhesion to polypropylene
Low density
Wide operating temperature range: the material retains its properties at extreme temperatures from -50 to +125 °C.
High surface quality

Applications

Exaflex TPE-S 60A is used in industries where high surface quality and scratch resistance are required. Main application areas include:

Automotive industry: exterior and interior trim elements, seals.

Electronics and household appliances: housings and parts with a glossy surface, elements requiring high scratch resistance.

Consumer goods: toys, sports equipment, products with an attractive surface and high resistance to mechanical damage.

Construction and architecture: decorative panels and profiles, facade elements.

Thermoplastic elastomer Exaflex TPE-S 60A

Parameter

Unit

Value

Shore A hardness (15 s)

—

60 (ISO 868)

Density

g/cm³

1.10 (ISO 1183-1)

Tensile strength

MPa

10 (ISO 37)

Modulus at 100 % strain

MPa

1,9 (ISO 37)

Modulus at 300 % strain

MPa

3,9 (ISO 37)

Elongation at break

750 (ISO 37)

Tear strength

N/mm

35 (ISO 34-1)

Typical data for this polymer class, for reference.

The stated values are measured by internal test methods close to the corresponding ISO and GOST standards. The information is for reference only; we recommend using the technical data after agreement with the supplier and signing of a normative technical specification.