Products and services
General-purpose ABS plastic Exablend® ABS 1022NC
Description
Exablend® ABS 1022NC is an unreinforced acrylonitrile-butadiene-styrene (ABS) material intended for injection molding. Its key characteristics include good impact resistance, moderate tensile strength and excellent processability with a high melt flow index. The material demonstrates good dimensional stability, low shrinkage and heat resistance, making it versatile for a variety of applications.
Advantages:
- UV-stabilized
- Weather resistant
- Low water absorption
- Good heat resistance
Applications:
The material is ideally suited for consumer goods, automotive interiors, household appliances and lightweight structural components requiring balanced mechanical properties and efficient processing.
Parameter
Unit
Value
Physical properties:
Density
g/cm³
1.06 (ISO 1183-1)
Melt flow rate (MFR, 220 °C / 10 kg)
g/10 min
20 (ISO 1133-1)
Mechanical properties:
Tensile strength
MPa
48 (ISO 527-1/-2)
Charpy impact strength (notched, 23 °C)
kJ/m²
23 (ISO 179-1/1eA)
Flexural strength
MPa
63 (ISO 178)
Elongation at break
%
18 (ISO 527-1/-2)
Tensile modulus
MPa
2000 (ISO 527-1/-2)
*
Typical data for this polymer class, for reference.
The stated values are measured by internal test methods close to the corresponding ISO and GOST standards.
The information is for reference only; we recommend using the technical data after agreement with the supplier and signing of a normative technical specification.
