Товары и услуги
Extrusion Polyamide PA6/66 Copolymer Durethan C 38 FA
Description
A polyamide 6 copolymer, PA 6 (nylon 6), with lubricant. It has medium viscosity, improved surface quality, high stiffness and gloss. It provides dimensional accuracy, is easy to process, and offers fast solidification and short molding cycles. Suitable for processing by extrusion.
Advantages
- High wear resistance
- Resistance to stress cracking
- High chemical resistance
- Very good oxygen barrier properties
- Dimensional stability
- High productivity (short molding cycles)
- Low coefficient of friction
- Gloss
- Heat resistance
- Impact resistance
- High stiffness
- Surface quality
- Molding and extrusion
Applications
Recommended for the production of films, multilayer films of the PE-x-PA-x-PE type (x = adhesive layer), sausage casings, etc. Complies with EU requirements (2002/95/EC) and the RoHS and REACH directives.
Property
Unit
Value
Physical properties:
Density
g/cm³
1.13 (ISO 1183-1)
Water absorption (saturation, 23 °C)
%
10 (ISO 62)
Moisture absorption (air, 23 °C, 50 % RH)
%
3 (ISO 62)
Bulk density
kg/m³
700
Melt volume rate (MVR, 230 °C / 2.16 kg)
cm³/10 min
5 (ISO 1133-1)
Melt flow rate (MFR, 230 °C / 2.16 kg)
g/10 min
6 (ISO 1133-1)
Electrical properties:
Volume resistivity
Ω·m
1×10¹³ (IEC 62631-3-1)
Surface resistivity
Ω
1×10¹¹ (IEC 62631-3-2)
Dielectric constant
—
3 (IEC 62631-2-1)
Dielectric strength
kV/mm
30 (IEC 60243-1)
Thermal properties:
Melting temperature (Tm)
°C
212 (ISO 11357-3)
*
Typical data for this polymer class, for reference.
Указанные показатели измеряются по внутренним методикам, близким к соответствующим ISO, ГОСТ
Информация носит ознакомительный характер, рекомендуем использовать техническую информацию после согласования с поставщиком и подписания нормативно-технической спецификации
