Товары и услуги
High-viscosity extrusion polyamide PA6 Durethan B35 FA
Description
Polyamide (PA 6) with lubricant, medium viscosity. It has good sliding properties, excellent electrical insulation characteristics, high mechanical strength and high stiffness. Suitable for processing by extrusion.
Key characteristics of Polyamide 6 Durethan B35 FA include:
- good impact toughness
- low coefficient of friction
- ability to withstand dynamic loads
- processability and ease of processing
- provides high resistance to wear, abrasion and impact over a long period
- chemically resistant to substances such as fuels, lubricants, solvents and cleaning agents
Material Wizard will help you select commercially available extrusion polyamide grades for your production.
Applications
Monofilament, extrusion films, especially BOPA film, coextrusion molding of PA-PE composite films. Complies with REACH (Regulation (EC) No 1907/2006) and RoHS certification. Complies with FDA (Regulation 21 CFR 177.1500) and can be used in direct contact with food.
Property
Unit
Value
Physical properties:
Density
g/cm³
1,14 (ISO 1183-1)
Water absorption
%
10 (ISO 62)
Moisture absorption
%
3 (ISO 62)
MFR (235 °C / 2,16 kg)
g/10 min
8 (ISO 1133-1)
Mechanical properties:
Tensile strength
MPa
35 (ISO 527-1/-2)
Elongation at break
%
≥50 (conditioned, ISO 527-1/-2)
Elongation at yield
%
25 (conditioned, ISO 527-1/-2)
Tensile modulus
MPa
800 (ISO 527-1/-2)
Charpy unnotched impact strength
kJ/m²
no break (ISO 179-1/1eU)
Izod notched impact strength, -30 °C
kJ/m²
7 (ISO 180/1A)
Charpy notched impact strength, -30 °C
kJ/m²
5 (ISO 179-1/1eA)
Charpy notched impact strength, +23 °C
kJ/m²
5 (ISO 179-1/1eA)
Electrical properties:
Volume resistivity
Ω·m
1.00e+10 (IEC 62631-3-1)
Surface resistivity
Ohm
1.00e+13 (IEC 62631-3-2)
Relative permittivity (1 MHz)
—
4,0 (conditioned, IEC 62631-2-1)
Dielectric strength
kV/mm
35 (IEC 60243-1)
Thermal properties:
Heat deflection temperature, 0.45 MPa
°C
150 (ISO 75-2)
Heat deflection temperature, 1.80 MPa
°C
50 (ISO 75-2)
Melting temperature
°C
222 (ISO 11357-3)
Processing properties:
Melt temperature
°C
260
Mold temperature
°C
40
Charpy notched impact strength, +23 °C (conditioned)
kJ/m²
50 (ISO 179-1/1eA)
UL 94 (0.8 mm)
class
HB (IEC 60695-11-10)
Limiting oxygen index (LOI)
%
24 (ISO 4589-1/-2)
CTE, parallel
µm/(m·K)
80 (ISO 11359-1/-2)
CTE, transverse
µm/(m·K)
80 (ISO 11359-1/-2)
CTI (comparative tracking index)
V
600 (IEC 60112)
*
Typical data for this polymer class, for reference.
Указанные показатели измеряются по внутренним методикам, близким к соответствующим ISO, ГОСТ
Информация носит ознакомительный характер, рекомендуем использовать техническую информацию после согласования с поставщиком и подписания нормативно-технической спецификации
