Products and services
General-purpose injection molding polyamide 6 Durethan B30 S
Description
Polyamide (PA6) with good electrical insulation properties, high mechanical strength and high stiffness.
Advantages
- high wear resistance
- good toughness
- low coefficient of friction
- resistant to dynamic loads
- high heat resistance (170 to 200 °C short-term; 80 to 160 °C long-term)
- suitable for injection molding
Applications
Used in the automotive industry, electrical engineering and electronics, and construction. Complies with REACH (Regulation (EC) No 1907/2006) and RoHS.
The stated values are measured using in-house methods close to the corresponding ISO and GOST standards. This information is for reference only and does not constitute an official technical data sheet for a batch. Please request the TDS and MSDS for the specific batch before industrial use.
Property
Unit
Value
Mechanical properties:
Tensile modulus
MPa
3200 (ISO 527-1/-2)
Tensile stress at yield
MPa
80
Elongation at yield
%
4 (ISO 527-1/-2)
Nominal strain at break
%
20 (ISO 527-1/-2)
Charpy unnotched impact strength, +23 °C
kJ/m²
NB (ISO 179-1/1eU)
Charpy unnotched impact strength, -30 °C
kJ/m²
NB (ISO 179-1/1eU)
Puncture — maximum force, +23 °C
N
5141 (ISO 6603-2)
Puncture — maximum force, -30 °C
N
6543 (ISO 6603-2)
Puncture energy, +23 °C
J
12 (ISO 6603-2)
Puncture energy, -30 °C
J
10 (ISO 6603-2)
Thermal properties:
Melting temperature, 10 °C/min
°C
222 (ISO 11357-3)
Heat deflection temperature (HDT/A, 1.8 MPa)
°C
55 (ISO 75-2)
Heat deflection temperature (HDT/B, 0.45 MPa)
°C
160 (ISO 75-2)
Coefficient of linear thermal expansion, parallel
E-6/K
100 (ISO 11359-2)
Coefficient of linear thermal expansion, transverse
E-6/K
110 (ISO 11359-2)
Flammability rating at 1.5 mm nominal thickness
class
V-2
Specimen thickness
mm
1,5
Flammability rating at specimen thickness
class
V-2
Specimen thickness
mm
0,4
Oxygen index
%
26 (ISO 4589-2)
Electrical properties:
Relative permittivity, 100 Hz
4 (IEC 62631-2-1)
Relative permittivity, 1 MHz
3,5 (IEC 62631-2-1)
Dissipation factor, 100 Hz
E-4
170
Dissipation factor, 1 MHz
E-4
200
Volume resistivity
Ω·m
1E13 (IEC 62631-3-1)
Electric strength
kV/mm
30 (IEC 60243-1)
Comparative tracking index (CTI)
V
600 (IEC 60112)
Other properties:
Water absorption
%
10 (ISO 62)
Moisture absorption
%
3
Density
g/cm³
1,14 (ISO 1183-1)
MFR (260 °C / 5 kg)
g/10 min
102 (ISO 1133-1)
Charpy notched impact strength, +23 °C
kJ/m²
≤10 (ISO 179-1/1eA)
Charpy notched impact strength, −30 °C
kJ/m²
≤10 (ISO 179-1/1eA)
HDT/C (8 MPa)
°C
45 (ISO 75-2)
Vicat softening temperature (VST/B 50 N)
°C
200 (ISO 306)
Viscosity number (VN)
cm³/g
134 (ISO 307)
*
Typical data for this polymer class, for reference.
The stated values are measured by internal test methods close to the corresponding ISO and GOST standards.
The information is for reference only; we recommend using the technical data after agreement with the supplier and signing of a normative technical specification.
