Elvaloy® PTW is a reactive terpolymer of ethylene, n-butyl acrylate and glycidyl methacrylate (E/n-BA/GMA) developed by DuPont (now Dow) specifically as a reactive impact modifier for engineering polymers with ester or amide functionality: PA (polyamides), PBT (polybutylene terephthalate) and PET (polyethylene terephthalate). The PTW designation stands for Polymer Toughener with Worldwide approval (international certification for food contact).

Key feature: the epoxy group of the glycidyl methacrylate unit (~8 wt % GMA) reacts chemically with the end groups of PA (-NH₂, -COOH) or the ester linkages of PBT/PET during compounding at 250–280 °C. This creates a grafted copolymer interphase between the matrix and the elastomer phase, improving adhesion and dispersion — considerably more effective than mechanical blending with a non-reactive elastomer (EPDM, SEBS).

Effect on the final matrix: +200–500 % impact strength at 10–20 % Elvaloy® PTW loading in PA, PBT or PET with minimal loss of stiffness (vs non-reactive modifiers, where the stiffness loss is 30–50 %). This has made Elvaloy® PTW the industry standard for super-tough polyamide and PBT grades.

Typical parameters: GMA content ~8 wt %, n-butyl acrylate content ~28 %, ethylene ~64 %, MFR ~12 g/10 min (190 °C / 2.16 kg), density 0.94 g/cm³, melting temperature Tm ~70 °C, Vicat softening temperature 47 °C, Shore A hardness ~85, elongation at break >500 %.

Key advantages

• Reactive impact modification of PA/PBT/PET — the only modifier class that grafts chemically onto the matrix end groups (vs mechanical blending)
• +200–500 % impact strength at 10–20 % loading — typical reinforcement for super-tough grades (PA66 + 15% PTW = notched impact strength of 80–120 kJ/m² vs ~5–6 for unmodified PA66)
• Minimal loss of stiffness compared with non-reactive modifiers thanks to interfacial adhesion
• Good resistance to hydrolysis and heat ageing — critical for PBT/PET applications
• FDA / EU 10/2011 compliance for food contact (PTW = Worldwide approval)
• Suitable for recycled PET — Elvaloy® PTW restores the molecular chain length of degraded rPET through epoxy coupling
• Stability at high compounding temperatures (250–290 °C) — does not scorch in the screw
• Flexible dosing — from 2 % (umbrella-effect tackifier) to 25 % (super-tough)

Applications

• Super-tough polyamides (PA6, PA66, PA610): compounds with non-break unnotched impact strength (>200 kJ/m²) — for airbag clips, snap-fit hardware and fasteners with critical impact loads at −40…+80 °C
• Impact modification of PBT: for automotive connectors, electric-vehicle charging systems and consumer electronics — higher impact strength without loss of dielectric properties
• PET bottle-grade upgrading: adding 1–3 % Elvaloy® PTW to bottle-grade PET for cold climates (winter retail at −20 °C) — reduced brittleness
• Compatibilizer for PA/PE blends: a bridge between incompatible PA and PE matrices for hybrid multilayer packaging and technical compounds
• Recycled PET / rPET upgrading: restoring the intrinsic viscosity of degraded rPET — moving from mechanical to reactive recycling
• Road construction and roofing mastics: bitumen modifier with improved adhesion to mineral aggregates
• Hot-melt adhesives for thermoplastics: connection-bridge adhesive between an EVA matrix and PA/PET films

Limitations

• The reactivity with PA/PBT/PET is a feature, but it also requires precise control of the compounding temperature (250–280 °C; higher — GMA degradation, lower — insufficient grafting)
• Incompatible with matrices without active functional groups (PE, PP) unless an additional compatibilizer is used
• Price is 3–5 times higher than non-reactive impact modifiers (EPDM, SBS, SEBS) — justified only for critical super-tough applications
• The epoxy function is moisture-sensitive — the matrix must be dried before compounding

Global market counterparts: Arkema Lotader® AX8840 (E/MA/GMA), SK Functional Polymer Bondyram® 7103 (E/BA/GMA), Mitsubishi Modiper® A4400 (E/GMA), BASF Joncryl® ADR (GMA-based chain extenders, a narrower niche). Elvaloy® PTW is the original DuPont / Dow grade with the longest application history and the most accessible technical support.

The stated values are measured using in-house methods close to the corresponding ISO, ASTM and GOST standards. This information is for reference only and does not constitute an official batch data sheet. Please request the TDS and MSDS for the specific batch before industrial use.

The post Elvaloy PTW appeared first on MaterialWizard.

An ultra-high molecular weight siloxane polymer that significantly increases the scratch resistance of polyolefin products and reduces wear. In extrusion processes it acts as a processing aid, reducing internal friction and extruder energy consumption, and improving melt laminarity.

In engineering plastics it increases abrasion resistance and reduces the coefficient of friction.

The post Siloxane Tribological Modifier appeared first on MaterialWizard.

A chemically reactive modifier of impact strength, viscosity and molecular weight of condensation polymers.

The chain extension mechanism improves the properties of a number of polymers. Improves the physical and mechanical characteristics of polycondensation polymers. Increases the hydrolysis resistance of PET, PBT, PC, PA 6, PA 66.

The post Molecular Weight Modifier for Condensation Polymers appeared first on MaterialWizard.

A maleated styrene-ethylene-butylene-styrene graft copolymer with UV and thermal stabilization.

Key characteristics of the maleated styrene-ethylene-butylene-styrene copolymer include:

• compatibility with virtually all polymers
• high strength
• effective improvement of low-temperature resistance
• low viscosity, good flowability
• active groups enable chemical modification

Applications

Modification of engineering polymers, impact strength improvement, adhesives, high-reliability products, a component of TPE footwear formulations.

The post Maleated Styrene-Ethylene-Butylene-Styrene Copolymer appeared first on MaterialWizard.